Downloads
  • Loggers
  • USB Adapter
  • MS+
  • MS
  • T & RH Transmitter
  • Demo data
  • Price List
  • Download of programs for dataloggers

    Programs for dataloggers COMET are designed for operational systems Windows 98 and later (minimum required configuration: Pentium 166, 32MB RAM)

    Programs have two versions - basic version is free of charge, optional version is paid (customer obtains licence card with installation code).

    Installation program is common for both versions of program (basic and optional). When program is running first time, it asks installation code - if code is entered, program will run as optional version. If no code is supplied, program will be installed as basic version.

    Program for dataloggers COMET (3.1 MB) - program for all temperature, humidity, voltage, current loggers "BlackBox" (models R..., S..., L....), for new COMMETER loggers (models D...), for loggers with printer (T-PRINT) and older loggers (models ZT, ZT1EXT, ZT4EXT, ZT65, ZT65EXT, ZTH, Z420, Z01V, ZP, ZV, ZS), ver. 1.22.10.0

    USB adapter driver (355kB) - driver for USB infrared communication adapters for loggers L..., R..., S... . Unzip downloaded file to diskette or harddisk folder and plug USB adapter into computer's USB port. Windows try to find appropriate driver - enter where unzipped files are placed(diskette or disk folder). Folder with files can be erased after installation and computer should be restarted. Detailed instructions for Windows 2000, Windows XP (PDF 476kB), for Windows 98, Windows ME (PDF 442kB)

    New generation sixteen channel dataloggers MS2+, MS3+, MS4+ (2,9MB) - program for new sixteen channel dataloggers MS2+, MS3+, MS4+, ver. 1.4.8.0

    Sixteen channel dataloggers MS2, MS3, MS4 (1,4MB) - program for sixteen channel dataloggers, ver. 1.12.13.0

    Configuration program for temperature-humidity transmitters with analog, serial or Ethernet outputs (Txxxx range) (1,2 MB, ver. 2.1.4.0). You need also special communication cable for analog output transmitters (SP003), and USB port driver for this cable. Driver is automatically installed during program setup on Windows 2000 and Windows XP systems. Driver for Windows 98, Windows ME has to be installed separately (see link USB adapter driver above on this page). No special communication cable and USB driver are required for transducers with serial RS232, RS485 or Ethernet outputs. If you want to use SNMP protocol, download also MIB tables (15 kB).

    Demo

    It is possible to download demonstration record files for above programs from different data logger models. To view demonstration record files install proper logger program first and then demonstration data.
    Demonstration data for program for data loggers
    Demonstration data for program for MS2+, MS3+, MS4+ monitoring systems

    HOME    COMPANY    NEWS    PRODUCTS    ENGINEERING    SUPPORT    SEARCH ..

    1997-2007 CSD Computer Solutions Dev. AG    Stand: 12.04.2007
    Meielenfeldweg 10 - CH-3052 Zollikofen - Telefon +41 31 914 08 08 - Fax +41 31 914 08 00