! New generation !

Temperature probes and transducers for Pt1000/3850ppm sensor with 4-20mA output for two-wire connection are built in a durable watertight case. Output temperature range is user adjustable. Degrees Celsius and Fahrenheit are user selectable. Large dual line LCD is an advantage. Display is possible to switch off. Computerized design ensures maximum long term stability and fail indication.

APPLICATIONS - measuring and control of temperature at:

• warehouses
• glasshouses
• manufacturers
• museums, archives, galleries
• air-conditioned rooms
• weather stations

COMMON TECHNICAL PARAMETERS
Available temperature units:	degress Celsius, Fahrenheit
Accuracy of temperature output of T0110 probe:	±0.4°C
Accuracy of temperature output of T4111 transducer:	±0.15°C plus 0.1% from adjusted output span (without temperature probe)
Temperature operating range:	-30 to +80°C
Temperature operating range of LCD display:	readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Current output - two-wire connection:	4-20mA
Output temperature range:	user adjustable from the PC
Protection:	IP65 electronics
Power:	9-30Vdc
Warranty:	two years

Thermometer is available in the following types:

Thermometer Model	Measured value	Maximum range of measured temperature	Output	Note
T0110	temperature	-30 to +80°C	-30 to +80°C	outdoor and indoor Mechanical drawing Interconnection terminals
T4111	temperature	-200 to +600°C	-200 to +600°C	transducer for Pt1000/3850ppm probes, output range adjustable by the user Mechanical drawing Interconnection terminals Manual in pdf

Outputs are adjusted to maximum range from the manufacturer. Output range is user adjustable from the PC by means of the optional cable SP003 - see below. Free configuration program for transmitter adjustment is ready to download anytime. If different adjustment of temperature output range is required, please specify required output range.

Ordering example: Thermometer T4111, output -100 to +30°C

Typical application wiring

Calculation of minimum power voltage Uss for proper operation:
Uss min> Uo min + Imax * Rz,
where: Uo min= 9 V
Imax... approximately 20 mA
Rz... sensing resistor (shunt)

Included accessory of thermometer:

Calibration certificate from the manufacturer, instruction manual. Free configuration program for transducer adjustment is ready to download anytime.

OPTIONAL ACCESSORY OF THERMOMETER
	SP003	cable for thermometer adjustment via USB port
	probes	temperature probes with Pt1000 sensor without connector - probe marking is followed by symbol /0. Recommended is multi-purpose watertight probe Pt1000TG8/0 available with cable lengths 1, 2, 5, 10m
	MD036	self adhesive Dual Lock for easy installation
	SP005	Tool for easy wire connection to terminals

Thermometer is directly compatible with sixteen channel Comet data acquisition system MS2+, MS3+, MS4+.